View Full Version : Panasonic FP-7718

Custom Search

office machines
08-07-2007, 05:12 PM
I just did a maint on a Panasonic FP-7718 and I reset the maint counter, F7-22,23,26. But I cannot get the wrench to go away, went out of maint, user / clear stop, but stiil flashing wrench. I am missing something.

Thanks in Advance


08-07-2007, 07:43 PM
what u have done during that?

just a tech
08-12-2007, 05:47 PM
f7-26 is for the fuser cleaning web counter..if ya reset this counter to "0" then that's your problem...this counter counts down, not up.. maint. cycle for the web supply roller is supposed to be 80,000..set to 80k and see if wrench goes off..

08-13-2007, 02:58 PM
I agree with just_a_tech.

08-13-2007, 05:45 PM
Also, a long time ago while servicing a Panasonic FP-3270, it turns out the duplex counter may also kick up a wrench for PM.
Try resetting the duplex counter if it has one.

08-13-2007, 06:05 PM
Just a Tech is correct.

08-13-2007, 06:47 PM
in panasonic change the values by 0 and 1.

Custom Search