View Full Version : Error Code BH C200
qbert
05-04-2011, 12:02 PM
Hi all,
after change transfer belt i have this error code: p-21
My assistance tell me that was nothing...but i want to solve and delete this error. Someone can tell me how to solve ?
The machine had 120000 copy and two years old.
Many thanks :)
EarthKmTech
05-04-2011, 01:54 PM
did you clean the image density control sensors before inserting the new transfer belt ?
If not thats where i would start, and check the PH units are clean and all IUS are performing satisfactorily.
JustManuals
05-04-2011, 06:24 PM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
qbert
05-20-2011, 03:01 PM
For now I had to calibrate the image density from the technical menu.
I will ask as soon as possible if I did as you suggested.
Thanks PerthKMTECH
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.