View Full Version : Miscellaneous How do you reset the Konica 363,223 drum units
rocky65
05-10-2011, 07:06 PM
Please help I know how to reset the drum count on the 250 with replacing the unit but how do I do it on the 363 series.
emujo
05-10-2011, 07:11 PM
Assuming you can get into servcie mode (and don't ask for password)...
Clear the following life counter using the Service Mode.
• Select [Service Mode]
→ [Counter] → [Life] → [2] and clear the count of [Drum unit Rotation
Time
2.
Touch [END].
3.
Emujo
Turn OFF the main power switch.
rocky65
05-10-2011, 07:51 PM
Thank you. Do you to make so that the PM message will not come back up again?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.