PDA

View Full Version : Miscellaneous konica 363 drum message


Custom Search


rocky65
05-10-2011, 07:50 PM
I would like some help on how to make it so that the drum and dv message will not be dispalyed

JustManuals
05-10-2011, 08:49 PM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

Mr Spock
05-10-2011, 11:05 PM
Requires special firmware from Km and then service mode changes.

bigdcopy
05-11-2011, 12:12 AM
does not require special firmware it is a dipswitch setting. will post it later.

bigdcopy
05-12-2011, 03:16 AM
go to softswitch settings in the service mode and select switch 418 bit 3 and set it to a zero turn the main power switch off/on and this will change it. this works on 250, and 350 also

Custom Search