View Full Version : Multi Pdf pages to a single PDF
jokacross
05-12-2011, 11:03 AM
I have a KM c450 and when scanning multi pages the separate that to multi pdf don't put them into a single pdf. I search all properties but didn't find anything about this! what can i do thanks!
jokacross
05-12-2011, 11:04 AM
I know that was a thread about this I post a reply but nobody say anything
ineo+6501
05-12-2011, 11:15 AM
Turn on the HDD in service mode and in the file type page of the scan settings choose multi-page
jokacross
05-12-2011, 11:35 AM
I dont know how to turn on the HDD in service mode. how I do that? is not this stop00stop01? thanks
ineo+6501
05-12-2011, 11:41 AM
it is yes
jokacross
05-12-2011, 11:49 AM
but cant find that? In what menu is it?
mrwho
05-12-2011, 12:16 PM
System2 -> HDD
I think
jokacross
05-12-2011, 02:34 PM
there only says 'installed' 'not installed'!
ineo+6501
05-12-2011, 03:05 PM
So press installed.
Then come out of service mode.
enter the SCAN section
Choose Address
Choose "scan settings"
touch "file type", in there should be "single page" "multi-page". Choose multi page
jokacross
05-12-2011, 03:54 PM
there's not! I cant find it!
ineo+6501
05-12-2011, 04:25 PM
It should look like this. I have never seen this option missing, only when the HDD is not installed.
ineo+6501
05-12-2011, 04:36 PM
You did cycle the main power after choosing HDD "installed" didn't you?
jokacross
05-12-2011, 06:43 PM
perfect! Thanks a lot problem solved! I forget to cycle the main power!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.