PDA

View Full Version : Konica Minolte Bizhub 130F - need technical Solution


Custom Search


wiedu
05-15-2011, 11:15 AM
When i set the configuration as automatically copy then i will have blurred copy examples and when I manuell set up the toner cartridge (http://dict.leo.org/ende?lp=ende&p=Ci4HO3kMAA&search=cartridge&trestr=0x8001) to have a dense hardcopy it doesnt blurry anymore. I have cleaned the lenses but it didnt help.

Do you have a solution?

thanks in advance

JustManuals
05-15-2011, 09:40 PM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

wiedu
05-16-2011, 11:30 AM
I already have this service manual, but it didnt help..:)
do you have another idea?

tech51
05-16-2011, 07:44 PM
When i set the configuration as automatically copy then i will have blurred copy examples and when I manuell set up the toner cartridge (http://dict.leo.org/ende?lp=ende&p=Ci4HO3kMAA&search=cartridge&trestr=0x8001) to have a dense hardcopy it doesnt blurry anymore. I have cleaned the lenses but it didnt help.

Do you have a solution?


thanks in advance

When you say lenses I assume you mean the mirrors? If they are clean then I would suggest that the LED array is dirty. Remove the drum and clean them with a cloth and a little alcohol. This should improve matters....

empiru
05-16-2011, 07:56 PM
Try printing some configuration pages from the menu, to see if your problem is at the optical part or on the printing part - so to say..

acusso1234
05-23-2011, 06:08 PM
I already have this service manual, but it didnt help..:)
do you have another idea?
Try this: From the copy menu press: Menu, *, 0 (zero), 9. The display show: Life Monitor. So you press the down arrow of the navy button 4 times to display: Set background level. Now press enter and wait 2 minutes while the normal copy screen come back. This will re calibrate your scanner after the cleaning of optics.

remati
05-24-2011, 09:59 PM
try make some internal reports...
If they are good...itīs a problem of scanner...
If they are blurred maybe you have a toner cartridge with defect or a malfuncion fuser(broken gear)...
times ago we have some problems with toner cartridges...spoted copys,like drops of water...
ok?

Custom Search