1050 operation unit

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dxp247
    • Jul 2025

    #1

    1050 operation unit

    I am working on a bizhub pro 1050. The machine turns on no problem but the touch screen is not operating. Go to utility on keypad hit 05 for touch screen adjustment and will not respond to any touch on the screen. Hard Keys on pad will function. Not sure if its the controller board or the touch panel. Need help please.
  • empiru
    Trusted Tech

    100+ Posts
    • Feb 2011
    • 229

    #2
    As far as I know, you can adjust the panel by entering the Utility menu and then press Stop-00-Stop--0x. I put x there, because I can't remember for sure, but you can try to put there every number between 2 and 9. I think it was 5 or 9, I can't remember exactly.

    I hope this helps.
    I don't help end-users. Hate me, give me bad reputation, I don't give a rat's a**. Pay a tehnician to solve your problem! We have to live too! What do you do when something hurts? Do you go to a doctor, or do you search it on google/ forums?

    Comment

    • dxp247

      #3
      Thanks I will give it a try.

      Comment

      • dxp247

        #4
        Well that didn't help at all. What I'm having here is total non response from the
        touch panel. Resetting does not work and doing a calibration is not possible due
        to the non response of the touch panel. The hard key panel below the screen
        still responds. What I need to know is what part is the most likely one to have
        failed. It's either the driver board for the touch panel or the panel itself and I'm
        just not sure of which one it is. Any further help is of course appreciated.

        Comment

        Working...