PDA

View Full Version : konica c220


Custom Search


Transam1
05-20-2011, 05:36 PM
tray 3 will occassionally say reset tray 3 you open and close the drawer and off it goes
now cant print from tray 3 at all.unit is just over 3 months old has under 4k.
konica says its out of warranty.
anyone come across this problem if so how did you solve it
thanks
gary

JustManuals
05-20-2011, 09:59 PM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

david.post
11-07-2012, 10:42 AM
tray 3 will occassionally say reset tray 3 you open and close the drawer and off it goes
now cant print from tray 3 at all.unit is just over 3 months old has under 4k.
konica says its out of warranty.
anyone come across this problem if so how did you solve it
thanks
gary

Did you find out what is was? I have just received a call like that, J9901. Mine is from the 1st tray. I'm guessing the paper is dropping while printing. Im going to check that black lever. Any help will be appreciated.

ni311
11-08-2012, 05:30 PM
If the user is using too much force when closing the trays, the back of the tray and the claw on the machine might get broken. From what I know, there is a kit that you can use to fix this problem and the claw has been redesign and has a new code. The same tray issues you will find on medium b/w machine, like Bizhub 282. If anyone is interested, I can search deeper in it.

Custom Search