View Full Version : BH 250 key counter
selex
05-25-2011, 10:21 AM
HI!
I installed an external counter on a bizhub 250.
works well when copy, when the machine print from pc, the external counter don't work!
someone knows the solution?? please...
PS. Sorry for my bad english...
EarthKmTech
05-25-2011, 09:35 PM
I've only ever used the key counter port for copy control. dont think it can even do what your trying to do.
for print job control and monitoring I've used vendor mode ports but with additional hardware.
selex
05-27-2011, 11:54 AM
I've used the black connector on the right side of the scanner unit whit cartadis tc11n..
Work well for copy mode but for print job don't work.. The machine print whitout card..
Why?
selex
06-08-2011, 03:38 PM
please !can anyone help me?
dallas
06-08-2011, 05:04 PM
Try this setting ...
Soft SW 481 Bit 0
0 : no print accounting (default)
1 : PC prints are accounted
Note: When print accounting is enabled, the MFP accepts only “secure” print jobs. Normal print jobs are deleted on the MFP.
selex
06-09-2011, 04:32 PM
Yes it works thank 'u soo mutch Dallas !!!!!!!!!!!!!
selex
05-20-2013, 09:37 AM
Hi Dallas i have the same problem with bh 211, copy ok , print no.. You ave any solutions?
Thank 'u
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.