PDA

View Full Version : Miscellaneous black line as thin as a hair


Custom Search


rumiayukawa
05-27-2011, 11:34 PM
When I print there's a small black lines as thin as a hair. Stabilizing the machine would clear this?? What could it be? Heeelp!

empiru
05-28-2011, 03:45 PM
And the machine would be.....? Anyway, in most cases it could be a problem of the cleaning blade not doing it's job right... or, it could be a fixing problem...

JustManuals
05-28-2011, 09:26 PM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

EarthKmTech
05-29-2011, 01:36 AM
can also be a scratched drum from the likes of a staple

fixthecopier
05-29-2011, 01:57 AM
bet this is an End user, don't waste your time.

EarthKmTech
05-29-2011, 02:00 AM
dont we waste our lives dealing with end users every day ? ;)

rumiayukawa
05-29-2011, 04:38 AM
It's a bizhub C451. I don't speak english very well but this was the only forum that I found hepful on the internet. So If you can help me I'd appreciate it. Recently we've had problems with the black IU, should I replace it? We don't have stapling unit. Thank you.

Hansoon
05-29-2011, 06:23 AM
.............."We don't have stapling unit"........

:)

Hans

mrfixit
05-29-2011, 12:00 PM
There's your problem, if you get a stapling unit the line should go away.;)

rumiayukawa
05-29-2011, 09:38 PM
Gracias por burlarse de mí, malparidos

Hansoon
05-30-2011, 05:54 AM
tsk, tsk, tsk......

Custom Search