View Full Version : Help with the web solenoid for Konica 7155
Maindron1
05-28-2011, 07:32 PM
Could anybody tell me if there is something that I am supposed to do to the web solenoid for the konica 7155 before I install it because they never advance and if I remove the little resistance spring on the side, it advances to fast. Is there a trick to it?
acusso1234
05-28-2011, 07:49 PM
Hi. First of all I must say: I've never seen this model. Say that, probably the problem is related to the sponge roller because it can't rotate freely. I clean the two side of it and the bushings and apply some grease for fusing unit.
Hope this is enough to solve the problem..
JustManuals
05-28-2011, 09:21 PM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads (http://www.justmanuals.com)
Paul@justmanuals.com
EarthKmTech
05-29-2011, 01:32 AM
are you resetting the fusing web counter ?
A little known fact on the newer versions of that engine once a certain count is reached on the web the solenoid no longer activates until its reset.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.