PDA

View Full Version : Miscellaneous 1050 pro strange second side..


Custom Search


Michko
05-30-2011, 02:31 PM
Hey.

I can't find out whats wrong with this machine.... A college did a pm service 750k a week ago and now it looks like this...
I changed separations unit and cleaned everything.

You can already see a little bit of this on the first side but not like this....
It gets better if I change paper weight to higher and yellow paper embossed. But nothing if I change power settings in service mode.

JustManuals
05-30-2011, 06:41 PM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

minimerlin
05-30-2011, 08:54 PM
Looks like either a dirty grid/charge wire or needs a new drum. (I take it the tramlines are in the feed direction?)

MAJSTOR
05-30-2011, 09:50 PM
it seams that drum has a few scars, but real problem is in the corona/greed. you can clean it or better change it. kind rgds
MAJSTOR

Michko
05-31-2011, 08:11 AM
yes it is....
but grid and corona are changed a week ago when the service was made. Even developer and drum was changed...

minimerlin
05-31-2011, 10:30 PM
laser window? or laser head itself?

Custom Search