joneze
06-07-2011, 10:05 AM
Hi all,
Got an issue on c252 that when prints are produced they come out really dark to the extend that reds come out a more brown colour then red. If you are to do the same as a copy the reds are OK.
Driver installed is the lastest PS driver no driver brightness settings...etc have been adjusted, firmware is all up to date on the machine.
Any suggestions will be appriciated
Thanks
Got an issue on c252 that when prints are produced they come out really dark to the extend that reds come out a more brown colour then red. If you are to do the same as a copy the reds are OK.
Driver installed is the lastest PS driver no driver brightness settings...etc have been adjusted, firmware is all up to date on the machine.
Any suggestions will be appriciated
Thanks