Just need any ideas, I have a bizhub 601 memory drops from 100% to 60% when scanning and printing out the counter sheet. I have replaced the cf-card and reflashed the machine, still same thing thing about replacing the oacb and memory, machine has no hdd. Thanks
-
-
I don't have any 601 in my area, but isn't that normal? Did you check the memory for errors? Did you verify the memory ammount? Did you try to add memory to see if the ocupation percentage changes?' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation! -
I haven't noticed it on the other 601 in the field, did check memory dimm, reseated all connectors on oacb, and print controll board, do not have extra memory to add, just overnighted new memory dimm.Comment
-
This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads
Paul@justmanuals.com
Comment
-
If you already did a CF card recovery, then your next step would be the OACB! Have had this happen a few times on this model
Everyone has the right to be stupid. Some people just abuse this privelage more than othersComment
Comment