View Full Version : 7145 Toner bottle rotation inop
mrfuser
06-09-2011, 09:38 PM
Anyone know of what fails when the toner bottle seems to stop rotating on the 7145? Looks like a bear to remove hopper assembly and jump in there for diagnosis. I would like to know what I am up against and possibly what parts to take along as this client is 45 minutes away.
Thanks all!
Kelly
BIG PAPA
06-09-2011, 10:25 PM
The Hopper isnt too bad. It is behind the board, but after that a couple screws and connectors and it comes off as a unit. there are a couple motors and a solenoid if memory serves.
Cantechman
06-10-2011, 03:23 AM
Isn't there also some gears in that unit? I had a similar Konica model one time that had stripped a couple of gears in that unit if I am thinking about the same part.
JustManuals
06-10-2011, 03:44 AM
This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from
http://www.justmanuals.com
Paul@justmanuals.com
mrfuser
06-10-2011, 05:33 PM
Turns out to be bad gears in the hopper motor section. Able to tweak frame a bit until I can get new ones ordered up.
Kelly
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.