BizHub 601 freezes randomly

[PanaTech]

I havea customer who has a BH-601 with finisher and large feeder, and the machine just freezes out of no where. It doesn't matter if it is printing or just idling.


It has hard drive, fax option, finisher, and large feeder.


any ideas?


Thanks in advance

[JustManuals]

This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from
http://www.justmanuals.com

Paul@justmanuals.com

[mrfixit]

Try updating the firmware, if you need the manual let me know and I will give it to you for free just because I am fed up with the manual spammer. This offer is for panatech only, please don't pm me requesting manuals.We can see your add at the top of the page, no need to spam every post. I've never seen you help anyone, you just try to sell manuals with spam. bad karma

[fixthecopier]

If the sensor that reads the drum patch gets dirty it can make the machine get stuck.

[1FRY1]

Yes fixthecopier sounds right

If it hangs on "please wait" it's the gamma sensor dirty or faulty