Fiery backup ISO on KM site?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cadkins
    Technician
    • Apr 2010
    • 34
    #1

    Fiery backup ISO on KM site?

    We did this in class and I could have sworn I got a copy of the software but I can't find it. It was software that was an ISO to be burned to disk and then you can boot from it and it will backup the Fiery system onto a USB flash drive.

    Can someone please tell me the name of this? I have looked through the controller section of the KM tech site and I can't seem to locate it.

    Thanks in advance!
    Tags: boot, controller, copy, disk, drive, fiery, roller, software, system, tech, usb
    • rangertech
      Technician
      • Jun 2011
      • 40
      #2
      what type of the Fiery?

        Comment

        • cadkins
          Technician
          • Apr 2010
          • 34
          #3
          IC-306. This one is attached to a C8000. However, it should work on all the Fiery's excluding the "backpack type", correct?

            Comment

            • mrwho
              Major Asshole!

              Site Contributor
              2,500+ Posts
              • Apr 2009
              • 4299
              #4
              You're telling it "will backup the Fiery onto an USB flash drive". Are you sure?

              What I remember (and it's been a while) is that it will allow you to reinstall the Fiery Software FROM an USB flash drive.
              ' "But the salesman said . . ." The salesman's an asshole!'
              Mascan42

              'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
              Ibid

              I'm just an ex-tech lurking around and spreading disinformation!

                Comment

                • cadkins
                  Technician
                  • Apr 2010
                  • 34
                  #5
                  Yeah, I'm sure. We did it in class.

                  It is on the EFI site, not the KM site.

                  Here it is : http://services.efi.com/support/driv...toolbox&ver=NA

                  It's the FCT (Fiery Clone Tool)

                    Comment

                    • Fred Dibnah
                      #6
                      Re: Fiery backup ISO on KM site?

                      Hello,
                      I have used this "fiery clone tool" to back up fierys, and it works very well
                      For IC-306 you will need fiery clone tool DVD version 1.4 (back up to DVD/fierys HDD/USB stick)
                      For older fierys (IC-303/IC-305) you will need fiery clone tool version 1.2
                      Fred

                        Comment

                        • ni311
                          Senior Tech

                          Site Contributor
                          500+ Posts
                          • May 2008
                          • 658
                          #7
                          Re: Fiery backup ISO on KM site?

                          I'm sure a lot of people from KM do not know about this tool...
                          Konica Minolta Error Codes - Explanations and Solutions

                            Comment

                            • RRodgers
                              Service Manager

                              1,000+ Posts
                              • Jun 2009
                              • 1947
                              #8
                              Re: Fiery backup ISO on KM site?

                              Originally posted by ni311
                              I'm sure a lot of people from KM do not know about this tool...
                              I didn't but now do. Thank you! Downloading now.
                              Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                                Comment

                                • bizhub1
                                  Trusted Tech

                                  Site Contributor
                                  100+ Posts
                                  • Sep 2008
                                  • 230
                                  #9
                                  Re: Fiery backup ISO on KM site?

                                  Just a FYI, on a IC 305 I had to use a 16 gig jump drive to back it up.

                                    Comment

                                    Previous template Next
                                    Working...