[Misc] c252 colour registration help

[Guest]

cant get my c252 to register. tried colour reg. under expert adjustment.
problem is that on x - axis on top of page cyan is to left but bottom of page is to right.
and magenta is top right and bottom left. thus both units are skewed. Is it possible to
adjust x - axis on top and then at bottom but in different directions

please i need help.

[mo0651]

What happened to get to that situation in the first place? did the machine fall down 2 flights of stairs? lol

[JustManuals]

This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from http://www.justmanuals.com

Paul@justmanuals.com

[sprawl]

can you show some examples?

[printpartner]

Dont know what happened, just bought it. Filled toner and replaced black image unit. Point to note - on over sized paper the cyan also printing on left side about 5mm band. Please let me know if it is fixable. Registration is a big deal. Top to bottom cyan and magenta is skewed by about .8 mm

[printpartner]

will scan and send over the weekend. Do you know if its fixable???

[rprem]

clean the idc sensor,still problem change the transfer belt

[mrwho]

If you got skewed colors - like you said to one side on top and to the other side on bottom - then there is a mechanical adjustment you need to perform in each of the three CMY colors.

PHAdjust.pdf

[rprem]

there is a screw for each laser so u can adjust it and see

[printpartner]

Hi I set the screws- worked perfectly - Thanks a lot you really helped!!!!!!!!!!!!!

[mrwho]

Hi I set the screws- worked perfectly - Thanks a lot you really helped!!!!!!!!!!!!!

Another satisfied customer.

[glasstec]

screws on the lasers will sort fix