oldschool
06-28-2011, 08:05 PM
There are three common vending modes; Key counter, Vendor1 and Vendor 2. The customer is using the key counter. When ever the key counter or vendor 1 are enabled the Mode Memory button is disabled. It's OK if Vendor 2 is enabled. Konica Minolta has done this with other features it feels do not work well in a vend environment like duplex. In the case of a disabled duplex there were secret software switches that Konica Minolta told us to change and duplexing worked again with a key counter. I've been through the manual and nothing jumped out at me. Does anyone know of a software switch to re-enable the "Mode Memory" button when in key counter mode.
Thanks
Thanks