View Full Version : sc46-08
mmbitar
08-29-2007, 03:21 PM
hi
sc46-08 at start up for konica 7155
can any one help
thanks
Bizhub
08-29-2007, 03:50 PM
Sounds like your printhead has gone down, or your image processing board. Either way it is not going to be cheap
Good Luck
when APC is performed, the index sensor output does not change
solution:
write section ICB (image control board) power connector
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.