Hansoon
07-07-2011, 06:11 AM
DF-605 on BH350, exit jam indication.
Takes up and ejects original as it should be but indicates afterwards a jam in the exit section of the ADF. This happens with the 1st sheet already.
Replaced exit sensor with flag and cleaned all the other sensors, replaced PWB-A, replaced the coil spring. Problem still exists. Testet the ADF on another machine with same results. Only thing I didn't change yet is the harness. Did I overlook something.......?
Hans
Takes up and ejects original as it should be but indicates afterwards a jam in the exit section of the ADF. This happens with the 1st sheet already.
Replaced exit sensor with flag and cleaned all the other sensors, replaced PWB-A, replaced the coil spring. Problem still exists. Testet the ADF on another machine with same results. Only thing I didn't change yet is the harness. Did I overlook something.......?
Hans