Hello everyone
I am working on a clients 7145 that is now displaying error code F26-6 after I replaced the developer material. The machine had very light copies so I replaced the developer and as soon I powered the machine it displayed code F26-3. I attempted to initialize L Detection in the 36 mode after pressing the "Start" tab the machine displayed "6" in the "Result" window of the L Detection Adjustment.
I would be grateful for any input on this problem and thank you in advace.
I am working on a clients 7145 that is now displaying error code F26-6 after I replaced the developer material. The machine had very light copies so I replaced the developer and as soon I powered the machine it displayed code F26-3. I attempted to initialize L Detection in the 36 mode after pressing the "Start" tab the machine displayed "6" in the "Result" window of the L Detection Adjustment.
I would be grateful for any input on this problem and thank you in advace.