PDA

View Full Version : Konica Minolta C6500 Wrinkle problem


Custom Search


mikcia
07-13-2011, 08:03 PM
Anyone been having problems with a bizhub c6500 wrinkle issue? I'm printing 12x18 duplex on 80lb dull coated text and i got nothing but severe wrinkling on my outputs......BTW, Konica Minolta copiers are nothing but garbage. :mad::mad::mad::mad::mad::mad::mad:

anything to fix this issue? i swear i think the techs are clueless sometimes.

Jules Winfield
07-13-2011, 08:28 PM
What media type setting are you using? Are you feeding the paper from the drawers or from the bypass tray? Are you sure the paper you're using is within specifications? And when I say specifications I mean what is written in the manual stating what type/weight of paper can be fed from which specific paper source, not what the salesman said the machine would run.

Hemlock
07-13-2011, 08:36 PM
It's your paper.

zoraldinho
07-13-2011, 10:20 PM
10820

Jules Winfield
07-13-2011, 10:31 PM
10820

Aren't you worried about dingleberries building up in the fuser?

Ianizer
07-14-2011, 07:37 AM
...BTW, Konica Minolta copiers are nothing but garbage. :mad::mad::mad::mad::mad::mad::mad:

Lol! Nice first post, Mikcia.:rolleyes:
Had days like that myself.

Deep breath...
Woosaa...

I'd check those media settings.
First, we need to know the gm2. 80# Text? Index?
Next, where does the wrinkling begin? Post-fuser? Pre-fuser?

6500's a decent box when it's dialed in.
Got one in the morning, in fact. I'll check CTN for your response while I'm in front of it...

-I

Ianizer
07-14-2011, 06:05 PM
...I'll check CTN for your response while I'm in front of it...

6500 call done and done... No word from Mikcia.
Sorry I couldn't be there for you, bruda.
-I

RickB
10-31-2011, 12:44 AM
If it's 80# text, lie to the machine & set it @ 20# plain.
Works for me every time.
I support 12 of these on my own (no tech support for 3 years) & have very few problems.

blackcat4866
10-31-2011, 02:30 AM
Anyone been having problems with a bizhub c6500 wrinkle issue? I'm printing 12x18 duplex on 80lb dull coated text and i got nothing but severe wrinkling on my outputs......BTW, Konica Minolta copiers are nothing but garbage. :mad::mad::mad::mad::mad::mad::mad:

anything to fix this issue? i swear i think the techs are clueless sometimes.

Way to go. You do realize that you're insulting the same individuals that you are asking advice of.

I would start by trying some different media. Coated paper stock is a nightmare with most any MFP. =^..^=

Custom Search