PDA

View Full Version : bizhub C351 and C350 Fuser?


Custom Search


mrfuser
07-19-2011, 05:49 PM
Does anyone know if a C350 fuser will work in a C351?

Thanks

Kelly

brent
07-19-2011, 07:48 PM
I don't have my parts book handy. but I think so. pretty sure.

minimerlin
07-19-2011, 08:45 PM
Spooky! We looked at both of these fusers today to see what the difference is between them..apart from the part number that is..and could not find any! Not tried in each others machines as they were in the shop for warranty claims! As far as I could see they should work!

brent
07-19-2011, 11:30 PM
c350 pn 4049 513
c351 pn 4049 523

I don't know if this is one of those deals like the web supply roller on a ep 6001 and a di 470
same damn web assy. but one had a little more matieral to make a pm go 400k rather then 200 k
I would hate to say yes it will work. then you pop an ic off the pwb a. I just don't know

with my luck... it would not work

brent

Spratt
07-21-2011, 07:51 AM
If i'm thinking of the right models I think the only difference is a round metal cover on the fuser where the locating pin goes. Peel that away and your fuser will fit.

ck1
07-22-2011, 03:24 AM
you can put C450 fusing to C350 work nice ( i do it ) , but for c350 to C351 unknow ...

ineo+6501
07-22-2011, 10:03 AM
Spratt is correct. Remove the silver metal disc shaped cover from the fuser unit. This is the only difference between C350 & C351/C450 fuser units.

Ianizer
07-24-2011, 04:13 AM
Spratt is correct. Remove the silver metal disc shaped cover from the fuser unit. This is the only difference between C350 & C351/C450 fuser units.

Stole my thunder, Ineo.;)
Isn't K-M cute?
-I

Custom Search