PDA

View Full Version : Miscellaneous KM BH C451 SKEW PRINT from BYPASS


Custom Search


rangertech
07-20-2011, 06:20 AM
i have'd problem skew print from bypass in km c451, i allready to check size paper its ok..
Any ideas for solve this problem? thanks

empiru
07-20-2011, 08:19 PM
You really mean the machine does the skew only when you print from Bypass Tray? Because I find it hard to believe.. have you checked prints from the other trays?

rangertech
07-21-2011, 04:38 AM
i'm sure only from bypass, if i print from tray its more better than bypass.... skew approximetly 2-3 mm

JustManuals
07-21-2011, 05:28 AM
This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)

Paul@justmanuals.com

Ianizer
07-21-2011, 07:24 AM
Retrofit hardware to C652 bypass.
-I

Spratt
07-21-2011, 08:01 AM
Hi have you tried increasing/decreasing the paper loop adjustment?
Service Mode, Machine,Printer Resist Loop, 2

Custom Search