KM C452 goes dead after starting up.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Jerry101
    #1

    [Electrical] KM C452 goes dead after starting up.

    We have a C452 and it starts up fine, and after about 2 to 5 minutes it completely shuts down. It shows on the display, tere is an open component and then it shuts down. The PSU has been replaced, controllerboard and the latest firmware has been set on the machine. Does anyone has a suggestion. The machine is almost new.
    Tags: c45, component, display, firmware, open, psu, set, shows
    • habik
      Service Manager

      Site Contributor
      1,000+ Posts
      • Apr 2010
      • 2013
      #2
      Re: KM C452 goes dead after starting up.

      I think is corrupted NV RAM.
      .OK Google! ... will I need Berrocca this morning?
      Firmwares HERE

        Comment

        • Ianizer
          Trusted Tech

          250+ Posts
          • Jul 2011
          • 380
          #3
          Re: KM C452 goes dead after starting up.

          Originally posted by habik
          I think is corrupted NV RAM.
          I concur.
          Please attempt NVRAM recover FW.
          -I
          My name Peggy.
          You got problem?

            Comment

            • mrwho
              Major Asshole!

              Site Contributor
              2,500+ Posts
              • Apr 2009
              • 4299
              #4
              Re: KM C452 goes dead after starting up.

              Originally posted by Ianizer
              I concur.
              Please attempt NVRAM recover FW.
              -I
              Hi there. I'm looking for this FW and can't find it - I can find every other previous model recovery FW but not this one. What search terms do you use on the KM site to find it?
              ' "But the salesman said . . ." The salesman's an asshole!'
              Mascan42

              'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
              Ibid

              I'm just an ex-tech lurking around and spreading disinformation!

                Comment

                Previous template Next
                Working...