PDA

View Full Version : Electrical KM C452 goes dead after starting up.


Custom Search


Jerry101
07-21-2011, 10:33 AM
We have a C452 and it starts up fine, and after about 2 to 5 minutes it completely shuts down. It shows on the display, tere is an open component and then it shuts down. The PSU has been replaced, controllerboard and the latest firmware has been set on the machine. Does anyone has a suggestion. The machine is almost new.:confused:

habik
07-22-2011, 12:44 PM
I think is corrupted NV RAM.

Ianizer
07-24-2011, 03:15 AM
I think is corrupted NV RAM.

I concur.
Please attempt NVRAM recover FW.
-I

mrwho
10-25-2012, 11:10 AM
I concur.
Please attempt NVRAM recover FW.
-I

Hi there. I'm looking for this FW and can't find it - I can find every other previous model recovery FW but not this one. What search terms do you use on the KM site to find it?

Custom Search