bizhubipi1976
07-22-2011, 03:39 AM
Hello,
My setup is a bizhub pro c500 with internal RIP Fiery X3e 50c.
I can't seem to print booklets that are folded to 5.5" x 8.5".
The booklets folded to 8.5" x 11" seem to work but i don't if I'm missing something in the setup.
How i'm setting up:
Page Size - 5.5" x 8.5" (Statement1) in the driver
Print Size - 8.5" x 11"R
Finishing Section:
Booklet mode:
Left Bind
Staple Center
Fold Center
Every time i try it it does create the imposition it just print the 5.5" x 8.5" page in the center on the 8.5" x 11" sheet..
Any idea what am i doing wrong..
Thanbks
Rak
My setup is a bizhub pro c500 with internal RIP Fiery X3e 50c.
I can't seem to print booklets that are folded to 5.5" x 8.5".
The booklets folded to 8.5" x 11" seem to work but i don't if I'm missing something in the setup.
How i'm setting up:
Page Size - 5.5" x 8.5" (Statement1) in the driver
Print Size - 8.5" x 11"R
Finishing Section:
Booklet mode:
Left Bind
Staple Center
Fold Center
Every time i try it it does create the imposition it just print the 5.5" x 8.5" page in the center on the 8.5" x 11" sheet..
Any idea what am i doing wrong..
Thanbks
Rak