PDA

View Full Version : Help! Konica CF 3102 has Error Code 13D6!


Custom Search


adastra100
07-23-2011, 03:04 AM
I am stuck with 3 jobs to do-and a stalled Minolta.

I replaced the black imaging unit, and now I get Error Code 13D6.
Does anyone know what this is?

I can't seem to find a list of error codes anywhere.
Any help would be much appreciated.

Thanks in advance....

empiru
07-23-2011, 11:55 AM
C13D6
A fault occurs while the LPH correction data is being downloaded
from the Magenta LPH EEPROM to the flash memory on PWBPIC
when power is turned ON. If I were you, I would turn off the machine, clean everything near the Magenta LPH Unit, turn the machine back again and see what happens..

JustManuals
07-23-2011, 07:46 PM
This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)

Paul@justmanuals.com

adastra100
07-25-2011, 09:51 PM
I am stuck with 3 jobs to do-and a stalled Minolta.

I replaced the black imaging unit, and now I get Error Code 13D6.
Does anyone know what this is?

I can't seem to find a list of error codes anywhere.
Any help would be much appreciated.

Thanks in advance....



It worked!!!!

I cleaned around the area, put the imaging unit back in, and it fixed it.

Thanks so much!!

empiru
07-25-2011, 11:58 PM
It worked!!!!

I cleaned around the area, put the imaging unit back in, and it fixed it.

Thanks so much!!

Glad to help!

Custom Search