wingit
07-23-2011, 03:42 PM
Can someone shed some light on Minolta Bizhub C350 with code of C0096.
The code happened Wedsday went-out Thursday cleared code, they called back Friday with code came back after less than 100 copies. I pulled all drums out and T-belt (spins freely) Transport belt is less than 6 months old,customer is low volume (4K month) manual says Image Transfer Belt pressure/retraction failure. Has a loud noise only when turning on copier, Copies look good, color and black/white.Noise coming from right-side door M7 underneath the transfer roller. I lubricated the the gears driven by M7 and the noise is less. Could the 2nd Image Tranfer pressure/retraction Moter M7 be putting to much stress on transport -belt causing code? Should I order M7?
Any help is always welcome. Machine has less than 250k.
Thank-you Sef
The code happened Wedsday went-out Thursday cleared code, they called back Friday with code came back after less than 100 copies. I pulled all drums out and T-belt (spins freely) Transport belt is less than 6 months old,customer is low volume (4K month) manual says Image Transfer Belt pressure/retraction failure. Has a loud noise only when turning on copier, Copies look good, color and black/white.Noise coming from right-side door M7 underneath the transfer roller. I lubricated the the gears driven by M7 and the noise is less. Could the 2nd Image Tranfer pressure/retraction Moter M7 be putting to much stress on transport -belt causing code? Should I order M7?
Any help is always welcome. Machine has less than 250k.
Thank-you Sef