BIZHUB 501

[semaj]

Konica Minolta bizhub 501.
NO DISPLAY ON PANEL ?!! machine has power but LCD panel doesnt work, any HELP please. thank you

[JustManuals]

This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)

Paul@justmanuals.com

[lurker53]

Check the cabling, if I remember correctly there's a DVI looking cable that plugs into the side of the display for that model.

Depending on what parts you have available, arranged by cost: (unless the panel costs more than boards? never had to order one)
1. Check cabling
2. Swap entire display panel, again if I'm thinking of the right machine it's just 1 screw. Usually it's board related though.
3. Swap boards in whichever order the service manual tells you to

Firmware would be a good option too, I think some machines have a timer and automatically start the firmware update if you can't push the start button.

[semaj]

:) thanks.....