Grantow
08-12-2011, 12:34 PM
I have a Konica Minolta 6500 with EFI Fiery EXP250 and I am currently using Command Workstation 5 to process jobs.
However I would like to be able to print the jobs direct from the PDF or software package using File > Print ect.
I have managed to set up so that you can print direct to the KM but just to default settings ie A4 plain 80gm. But I need to be able to access Fiery Features in the drop down. As I can only access duplex printing at the moment
So anyone know how to set up the Fiery Features in the print drop down, under File > Print.
Thanks in advance.
However I would like to be able to print the jobs direct from the PDF or software package using File > Print ect.
I have managed to set up so that you can print direct to the KM but just to default settings ie A4 plain 80gm. But I need to be able to access Fiery Features in the drop down. As I can only access duplex printing at the moment
So anyone know how to set up the Fiery Features in the print drop down, under File > Print.
Thanks in advance.