View Full Version : bizhub 750 with FS-504
truschi
08-18-2011, 02:04 PM
Hi,
i have a fs 504 with pk-505 and i cant use the punch option in the copier menu. I can only use the punching unit only when i print a document.
Thank you
Spidula
08-18-2011, 06:54 PM
Hi,
i have a fs 504 with pk-505 and i cant use the punch option in the copier menu. I can only use the punching unit only when i print a document.
Thank you
Sounds like dip switches need altering in tech rep mode. Best a tech to look at it! I can't remember the switches to change, but they should be in the pk installation guide if you have it.
truschi
08-19-2011, 11:20 AM
Sounds like dip switches need altering in tech rep mode. Best a tech to look at it! I can't remember the switches to change, but they should be in the pk installation guide if you have it.
I dont have the pk instalation guide. I find an answer in these forum but is for the bizhub 600 with the same pk. I tried to modify the DipSw but did not work.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.