View Full Version : Error Code C3821 error code on bizhub c253
tekkie
08-29-2011, 07:29 PM
any one had the error code C3821 on a bizhub C253 or an olivetti mf250 machine its abnormal low temperature the machine has had a new fuser unit still errors out it happens about once a week service manual points in direction of power supply or board trouble just wondered if anyone else had this problem before i start looking too deep
BIG PAPA
08-29-2011, 07:39 PM
Verify that they dont have any power issues. That can cause the machine to trip fuser codes.
I could be wrong but I thought there was special firmware for this?
Bizhub
09-01-2011, 10:35 AM
Stick this on your machine and read the small print !!!
1. Release version and download file name
Following program version is explained in this file.
[Release version]
Model
Program Name
Current Ver.
New Ver.
Program File Name
Checksum
Note
bizhub C353
MFP Firmware
GJ0-CG
GJ0-F9
A02E0Y0-F000-GJ0-F9.exe
36D4
-
bizhub C253
MFP Firmware
GK0-CG
GK0-F9
A02E0Y0-F000-GK0-F9.exe
1847
-
bizhub C203
MFP Firmware
GK5-CG
GK5-F9
A02E0Y0-F000-GK5-F9 .exe
BEC0
-
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.