PDA

View Full Version : taskalfa 300i f18a error??????


Custom Search


cmpelser
08-30-2011, 02:00 PM
i cant do firmware!
F18A error code on startup!
help!

Metalvoc
08-30-2011, 03:32 PM
I don't recall if it was the same code, but I had a similar code on another model where I couldn't load firmware. You might try re-seating all the connectors, dimms, memory, etc. Then try F/W. In my case, I needed a new Main PCB.

cmpelser
08-30-2011, 04:33 PM
This is with a new main board.

Custom Search