PDA

View Full Version : J72-19 jam code


Custom Search


pudgi300
09-08-2011, 02:24 AM
I have a 1050 with fs503 and get j72-19. Will only do it in staple mode with 8 1/2 x 11. I can run letter r and put a staple in top and it will run fine. As soon as a run with 8 1/2x11 it will finish the 1st set and exit it. Then the next sets 1st sheet will not go into stacker tray. I output ps5 and it is ok. Motor M13 runs. Anyone have a clue what is going on with this thing. Thanks for any help. Also can any one tell me why the worm gear on the motor keeps stripping and the white gear get a groove in it. The gear is part of se95-2520 kit and motor is 15aar71700. I then get 77-25 and lockout the stapler. The 77-25 is on a different machine .


Thanks Pudgi300

Custom Search