PDA

View Full Version : cardreader


Custom Search


patrick045
09-12-2011, 02:03 PM
cardreader solutions about Konica pro 920
The machine doesnot work because he need an card(reader)
I tried to solve it with HDD format but still it doesnot disapear
Please send me an solution if possible
Thanks

Mr Spock
09-13-2011, 12:56 AM
Need to go into billing mode and disable the coin vender option.

patrick045
09-13-2011, 03:53 PM
thx please inform how , we are wholesaler company and not very specialized in konica

thx in advance

patrick

tech51
09-13-2011, 07:15 PM
Might need the key counter link putting back in??

patrick045
09-14-2011, 07:25 AM
@ tech 51

machine came in without card reader , any other solutions ?


rgds

patrick

tech51
09-14-2011, 05:42 PM
What message are you getting on the panel?

patrick045
09-15-2011, 09:09 AM
panel is now showing " please insert key counter "

tech51
09-15-2011, 07:04 PM
panel is now showing " please insert key counter "

Then as I posted earlier, the Key Counter link needs to be put back in!!

ddude
09-16-2011, 04:54 AM
Then as I posted earlier, the Key Counter link needs to be put back in!!

I think that this is a 'loop connector' that tells the machine that there is no key counter connected- if you are a wholesaler, you should have plenty of Konica machines available to check this- look for the small rectangular cutout in the machines where a key counter would fit, and see the four pin loop connector attached to the wiring-temporarily place this in your problem machine and see if it solves your problem. Even though the connector is a four-pin connector, the machines usually have a two-pin loop to complete the circuit and satisfy the machine.

Custom Search