PDA

View Full Version : c352


Custom Search


wcody76
09-12-2011, 03:27 PM
i have a c352 i have changed out 2 displays and the display is still very dimm the display light will turn on

wcody76
09-12-2011, 06:32 PM
i have a c352 i have changed out 2 displays and the display is still very dimmbarely visable

Brischaffer
09-12-2011, 06:46 PM
Make sure that your ribbon cable is pluged all the way in. Also check the ribbon cable for damage.

JustManuals
09-12-2011, 08:36 PM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

Ianizer
09-13-2011, 03:25 AM
Turn up the contrast?
-I

SKTeK315
09-13-2011, 04:30 AM
Turn up the contrast?
-I

The contrast only does just that. The LCDs r visible & adjust through the VR. There's no lights. We know it's not the panel. The bus cable looks good to me & Will. I know what to look for onem. We both saw no bubbling, no Knicks, no fold breaks. Both ends were in like Flinn. On pwb side in the optics it's glued, so no movement there. Might be that board or main ???

Custom Search