View Full Version : Fiery C450 X3e setup procedure please
Michelle W
09-20-2011, 09:00 AM
Hi. We have Fiery X3eTY on C450, if someone could help with setup procedure. Currently not seen on machine. Thanks
Reboot The Fiery & after this nothing happens you have reinstall system software on the Fiery by using software CD through network cable.
Regards
Anil
emujo
09-20-2011, 02:16 PM
If the Fiery is installed correctly (scuzzy and x-over cables connected) you need to look at the image controller settings in service mode. Should be at a 1 for the fiery to be recognized. As to the setup instructions, search this site for other Fiery questions. Setup instructions are posted on here for a different problem within the last 2 months. Emujo
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.