PDA

View Full Version : Bizhub C652 J1730 code


Custom Search


sauce_boss
10-03-2011, 10:15 PM
Getting a J1730 code. Only happens out of Tray 3 and is intermittent. May go several thousand copies and then have several close to one another. Machine only has 60k on it and has had about 20 of these jams. I have swapped the 2 clutches in the feed unit and replaced the feed tires and dfpr. Any ideas?

bizhub1
10-04-2011, 03:26 AM
They have a updated paper feed frame and actuator for that problem from tray 3. Check the knowledgebase and it shows the updated parts.

sauce_boss
10-04-2011, 12:19 PM
Guess I shouldn't just trust searching the knowledge base with the mobile app, as nothing showed up. Thanks for the heads up I will give that a shot.

bizhub1
10-04-2011, 12:33 PM
It does come up in the mobile app, like 4th down or so.

Custom Search