PDA

View Full Version : simulation-panasonic ppc


Custom Search


songram
03-30-2005, 01:48 PM
dear friends,

i am in trouble maintening panasonic fp 7824 ppc. i have changed drum, developer,c.l blade, web roller etc. but i have no idea how to access into simulations. can anybody help knowing me the procedure. i need that for resetting maintenance count, developer and drum initialization.

i would be greatfull to you if u help me.
i am expert on sharp,konica,toshiba etc.

i am waitting for your responses.....

songram@msn.com

kuby
05-10-2005, 02:39 PM
developer calibration - Service mode F8-09

To clear PM - you go to F5-70, press \"print\". Press PM cycle, press \"OK\". Then go to F5-73 and repeat this procedure to clear WEB COUNTER.

TO enter service mode - press three keys in sequence - (do not let go until all 3 are held down) USER PRESET, ORIGINAL SIZE LEDGER (11x17), and 3.

To exit you must do this - Press USER PRESET & CLEAR/STOP simultaneously.

Gleq
03-01-2007, 10:27 AM
hi kuby
Ur right but check u press the key simultaneosly not sequencially
Thanks


developer calibration - Service mode F8-09

To clear PM - you go to F5-70, press \"print\". Press PM cycle, press \"OK\". Then go to F5-73 and repeat this procedure to clear WEB COUNTER.

TO enter service mode - press three keys in sequence - (do not let go until all 3 are held down) USER PRESET, ORIGINAL SIZE LEDGER (11x17), and 3.

To exit you must do this - Press USER PRESET & CLEAR/STOP simultaneously.

Custom Search