PDA

View Full Version : Error Code Error code for Konoica 7033


Custom Search


vonhetcchtel
10-13-2011, 12:06 PM
Goodday guys, I have another issue with Konica 7033 and I need your help. It is displaying error code F 35-4. Thanks

bushy
10-14-2011, 05:04 AM
You will need to reset the heat code.

Go to 25 mode select software switch

Go to adderess 3-1 to 3-6 and make sure there is a zero in all addresses

Bushy

CompyTech
10-14-2011, 02:46 PM
It's a fuser code. I would replace the thermistor (fixing sensor) PN: 26NA 8801 3

Then go in 25 mode software switch 3 - 1 set to 0 to reset the error. If you just go in and reset it with out replacement of sensor, it could cause problems or work flawlessly. Its your choice. :)

mrwho
10-14-2011, 03:15 PM
Yes, try to reset the error before replacing anything - 9 out of 10 times* the machine works fine just by resetting it.

* Tested in independent laboratories in Rafakistan. Your milleage may vary.

Custom Search