PDA

View Full Version : Miscellaneous Konica Minolta Bizhub Di 7210 Tonerlight stays on with new toner and developer.


Custom Search


joecopypro
10-22-2011, 10:38 AM
I'm working on a Konica Minolta  Di 7210, I replaced the developer and added new toner. Before this occured the customer ran the machine without toner it sounds like it's adding toner but copies are a bit light. I need sim codes and procedure. I know there is sim code 25, 36, and 47. The machine says add toner.

maccenterpc
10-24-2011, 12:22 PM
developing unit with damaged engine.

fixthecopier
10-25-2011, 10:03 AM
Pull the DV box and inspect the rear, where the gears are. The smallest gear will strip out and that can cause light copies.

Custom Search