View Full Version : SHARP & SAMSUNG ECR PROGRAMMING
iF YOU NEED HELP IN PROGRAMMING WITH SHARP OR SAMSUNG ECR OR NEED OF PARTS. CONTACT ME.
LARRY
hey larry, i read your post and i am in need of your assistance. i have a customer who has a samsung ER5215M register and wants to change it from a 5 dept(NLU) to a 15 DEPT or (NLU). can you tell me what flag i have to set. i\'m sure it is in service mode, correct? your assistance would be greatly appreciated.
thank you,
ray
disregard as i found the programming step.
ray
disregard as i found the programming step.
ray
JustManuals
02-20-2007, 04:40 AM
I have several of the Sharp and Samsung Service, Parts, Instruction and Programming manuals on my site at Just Manuals (http://www.justmanuals.com)
Paul@justmanuals.com
pedro
03-05-2007, 11:00 PM
Larry
I have a problem very basic with programming.
I have recently bought one of these, new but do not really understand the instructions.
I saw an ealrier answer with ref ABCDEFG but do not undrstand that either.
I want to program VAT rate and my assumption is:
8 ,#/st, 17.5%, #/st
8 ,#/st, 0%, #/st
Seems to be ok but then i go to the department section where I need dept 1 to be 17.5%,dept 2-4 to be 0%.
I can't understand those instructions and get a beep all the time.
what do ABCDEFEG mean there?how do i say I want dept 1 to link to 17.5% vat?
Please any help on this would be appreciated.
patrick
04-18-2009, 03:04 PM
Larry,
I need some help with a few samsungs er4940. Please email at
temporaryinsandity@gmail.com
Pat
JustManuals
04-18-2009, 09:30 PM
I wouldn't hold my breadth, the original post offering the help was in 2005 and in case you haven't noticed, this is 2009.
Paul@justmanuals.com
patrick
04-19-2009, 03:01 PM
I have them all done and delivered. I found out the problem and made the customer happy. I did know that the original post was 05, But who knows when they may be looking at the forum.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.