Bizhub C350 No Fiery SMTP Software Switches

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jjmiller_6

    #1

    Bizhub C350 No Fiery SMTP Software Switches

    I need to setup my outgoing mail server for SMTP Authentification. Which I read somewhere Software SW 380 = 44h. However I cannot seem to find where to load the software switches. The article I read said software SW is under Menu "Admin. 2" But I cannot seem to find this menu.....

    Any advice of how I can access the software switches?
  • emujo
    Field Supervisor

    2,500+ Posts
    • Jun 2009
    • 3009

    #2
    Re: Bizhub C350 No Fiery SMTP Software Switches

    You might want to set the Fiery up so you can utilize both the Fiery (for printing) and the embedded controller for the other functions. Search this site for "Fiery" and you should be able to download the instructions for this. Emujo
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

    Comment

    • mo0651
      Service Manager

      1,000+ Posts
      • Apr 2009
      • 1054

      #3
      Re: Bizhub C350 No Fiery SMTP Software Switches

      The instructions you are quoting are for the B/w bizhub 350. not the c350.

      Comment

      • emujo
        Field Supervisor

        2,500+ Posts
        • Jun 2009
        • 3009

        #4
        Re: Bizhub C350 No Fiery SMTP Software Switches

        Originally posted by mo0651
        The instructions you are quoting are for the B/w bizhub 350. not the c350.
        Are you refering to my post, or the original post? No offense meant. Emujo
        If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

        Comment

        • mo0651
          Service Manager

          1,000+ Posts
          • Apr 2009
          • 1054

          #5
          Re: Bizhub C350 No Fiery SMTP Software Switches

          The original post. Think yours snuck in just ahead.

          Comment

          Working...