PDA

View Full Version : Error Code C360 displays C-4501 error code


Custom Search


AjitN
11-05-2011, 03:16 AM
When machine is powered on in the morning, it delivers first 10-20 prints perfectly. After those prints machine displays C-4501 error code. Reset does not help nuch. Manual state it is Laser Malfunction due to SOS Sensor. Normally what is ovserved that if any problem in Laser unit, machine will not print at all and should display error code at startup only. Since it is in remote location, I got Laser unit, PRCB board & PH board along with me for testing.
Any body faced such problem / Any suggestions.

Thanks

cushtyasgold
11-05-2011, 10:22 AM
I have had the same problem I have updated Firmware to C6 working at the moment

Custom Search