PDA

View Full Version : 11X15 on Bizhub 421


Custom Search


COPIER DAVE
11-16-2011, 02:39 PM
I have a customer that wants to run 11X15 from the cassette.When we put 11X15 in we get a size of 8K and the 11X15 is not recognized when feeding from RADF or glass. I can manually select the cassette and force feed. Has anyone ran into this issue?

blackcat4866
11-17-2011, 01:20 AM
Well it's not any standard size for North American MFPs. US Standard Fanfold is 11" x 14 7/8", but no North American MFP is capable of recognizing that size in the document feeder or on the glass, or in a paper tray for that matter.

I would imagine that a print defined as that size would pull the correct paper.

Perhaps you could set up a Mode Memory, and store a custom original size, and pre-select the appropriate tray. I think it's safe to say that Auto Tray Selection with a non-standard original size is out of the question. =^..^=

Custom Search