PDA

View Full Version : bizhub 600


Custom Search


BBCo
12-05-2011, 09:18 AM
help me please, my bizhub 600 WARMING UP,READY TO SCAN and when i enter to tech rep mode i find error code C D203. I has read this error report in this forum and the answer is FIRMWARE NEED TO UPGRADE. how can i do it,and where i can find the firmware?

EarthKmTech
12-05-2011, 11:19 AM
call a technician.

Darren King
12-05-2011, 01:40 PM
The only person that has access to firmware is an authorized Konica Minolta technician.
Darren

fixthecopier
12-06-2011, 10:55 PM
Firmware does not fix shit most of the time. If it is stuck in warm up, the aidc sensor next to the drum could be dirty. Just a little toner on it will cause the machine to stay in warm up.

pepper38_cnd
12-06-2011, 11:18 PM
BBCo You have just received 3 great answers. I would recommend you read all 3 then re-visit the first. An untrained or inexperienced person messing with the firmware or the drum carriage in this machine is only asking for bigger problems.

jarwil
12-07-2011, 05:52 AM
could be irty drum sensor. A service on the machine should fix

BBCo
12-09-2011, 07:57 AM
Thank for your comment for this trouble.. i am a tech,,and i has clean sensor,and i am sure the problem accured because of software system, i call this trouble with " a worng minolta security system"
And now i has fix the probem without " ORIGINAL FIRMWARE " I say thank so much to my "software editing team"..

Keep on your life, and the machine is only the machine

Custom Search