PDA

View Full Version : c5501 with error c-2823


Custom Search


primozks
12-06-2011, 12:26 PM
Does anybody know what this could mean?

bizhub1
12-06-2011, 01:16 PM
Charging potential correction
Vh/C aborted.



Printer control board (PRCB)
Drum potential sensor board
/C (DRPSB/C)
Drum potential sensor /C
(DRPS/C)

primozks
12-06-2011, 02:02 PM
After restarting, error went off, but ground switch of the mains shut off two times while printing. I will try another outlet if there is something wrong with electric installation in the office. Or else, there can be some contact to the housing.
As I believe if there was electric overload, the fuse (16A 230V) would switch off, but not FID (0.5 A, 230V) (ground switch).
Thanks,
Primoz

primozks
12-06-2011, 02:44 PM
Found it.
There was no ground wire it outlet. There were only zero and phase. Ground was bridged with zero wire.
After connecting to other mains with grounding, everything is fine.
Thanks,
Primoz

Custom Search