Jedenco
12-06-2011, 03:02 PM
Hello,
I have a BH C200 that is in a loop cycling on/off Logo Screen then Abort Screen with error =0x00117036. We have reset machine, and flashed it with current firmware. After updating unit it will come up for just a few minutes then goes back into loop. Any advise is greatly appreciated.
Thanks,
J.13250
I have a BH C200 that is in a loop cycling on/off Logo Screen then Abort Screen with error =0x00117036. We have reset machine, and flashed it with current firmware. After updating unit it will come up for just a few minutes then goes back into loop. Any advise is greatly appreciated.
Thanks,
J.13250